A powerful architecture & Construction theme. Construct your website in the perfect Ratio.
Alienum phaedrum torquatos nec eu, vis detraxit periculis ex, nihil expetendis in mei. Mei an pericula
   Call us +44 (0)207 117 0110
   Mon – Fri 9AM-5:30PM

Outline radiator

Eskimo Design / Outline radiator

Outline radiator – colour match service


Compost, Maggie and Fopp are three subtly ‘sparkly / metallic’ colour finishes. We selected them as an alternative to RAL colours where applicable – because of their sheer beauty when applied to any of our forms of radiators.
On curves, they present stunning light and shade, highlighting the ‘glisten’ of this strong powder-coated finish. On our flat-panel Outline radiators, the colour sits beautifully between the clean lines of the front fascia and side depths. Never flat and just a little more opulent and interesting than a RAL or colour match, due to the depth that these colours seem to proffer.

Panel radiators are now everywhere. But there is nothing more pleasing than the simplicity and clean lines of our original Outline. A modular aluminium output radiator with a clean-lined front fascia. Especially when subtle and clean are part of your design vision. Outline offers some transformational finishes, but sometimes you want your radiators to blend with your scheme. This is where our colour match service ticks all of the boxes. A high-performance radiator, powder-coated to match your paintwork.

Low water volume and a diverter fitted as standard, means rapid warm-up and perfect for low-temperature heating systems such as heat pumps. Outline comes in either an electric model. Or central heating, water/hydronic model, offering bottom end connections as standard. Or specify hidden valve models with our Hinge & Bracket design.

Outline is available in a wide range of sizes and orientations. From full-length columns to long and low under window radiators. Bespoke sizes can be created to suit your pip centres. Two depths, 50mm or 95mm.

Sizes & Price Lists

Outline is available in either electric or water/hydronic central heating models. 50mm or 95mm depths available and standard sizes throughout, with additional bespoke sizes for water models. And hidden valve options available for water models. Including our Hinge & Bracket designs for radiators with 430mm minimum width and height dimensions.

Outline can be vertical, horizontal or square.

Hidden valve options available for water models. Including our Hinge & Bracket design for radiators with 430mm minimum width and height dimensions. Just CLICK HERE for a nice big PDF version, telling you all about valves or Hinge & Bracket hidden valves.

4-6 week lead time.

Special colour match powders or non standard RAL colour powders will apply an additional cost to your radiator order.
Our colour match service or non standard RAL powders, will not affect your radiator lead-time. Once you’ve purchased the radiator(s), we will ask you to send a colour chip to our powder team. Alternatively, if it’s a well known paint brand, we will just need the colour reference. Same for the RAL colour references. If colour matching, our expert team will then create a small powder match chip to send to you for your approval before proceeding to make the powder.

If you select a RAL colour, our standard RAL or a colour of your choice, please note that these powders have a tolerance called Delta E. Delta E readings should be less than 1%. This means that RAL colours and paint colour matches are very close if not perfect, but if you’re having different surface materials in the same colour, please be aware that there could always be a slight difference in tone or depth of colour. For example, the colour on wood work against the colour powder coated on to a metal radiator, may be different.

Colour can be applied to Outline, RON and Leggy RON radiators.

If you are buying for your own home, please go to our where to buy page where all of our very helpful retailers are listed. Contact them direct and they will look after you.

If you are trade, then please go to our trade page where you will find a bounty of useful, immediate information. And do contact us direct on sales@eskimodesign.co.uk for contract quotations. Or give us a call on +44 (0)207 117 0110.

Related Products